Fix: CLOCK_WATCHDOG_TIMEOUT Error 0x00000101 in Windows 10

CLOCK_WATCHDOG_TIMEOUT is one of the most severe blue screen of death errors you will face in Windows 10. This stop error 0x00000101 can occur on awindow systemwhen the specified processor is not processing it interferes. Normally, this problem appears when the processor is not responding or is blocked. In this state, you will see an abnormal prompt on the screen, and sometimes the device will shut down by itself to prevent further data loss. In addition to this, your device may stop working in some basic and essential functions, causing data to be lost immediately.

Also, this problem mostly occurs when the processor has problems with the cooperation of its cores and threads. Threads are tasks performed by kernels, where some kernels can have many threads at the same time. However, the main problem is that one thread is waiting for a proper response from another thread and those responses don't arrive. In technical terms, a state in which a set of processes are busy and the processor cannot continue processing tasks. It results because each resource is holding and waiting for another resource taken by some other process. And this process is called Deadlock. So, go through this article to fix this blue screen error and prevent it from happening in the future.

How to fix error 0x00000101 in Windows 10

To fix the BSOD 0x00000101 error, use the methods given below:

1] Start Windows 10 in safe mode

You may not be able to operate your device when CLOCK_WATCHDOG_TIMEOUT BSOD occurs. Here we recommend that you boot your device into theSafe Modewho came out as savior to carry out the resolution. In this special startup mode, the operating system loads a minimal user interface, with only the basic and essential services required to do so. Read the following steps to enter safe mode:

  • Click the Start menu and select theEnergybutton.
  • Hold down the Shift key and pressRestart.
  • On the Recovery screen, selectSolve problemsand thenAdvanced Options.
  • Now on the next page, click onstartup settings.
  • Click on theRestartand let your PC reboot again.
  • Various boot processes will be performed here.
  • Upon completion of the cycle, the startup configuration will appear on the screen.
  • pressthe F4function key,windows 10is nowstarting in safe mode.

2] Update your BIOS to fix error 0x00000101

BIOS update is in fact an advanced procedure that installs new firmware for your motherboard. However, the process can be possibly dangerous if not done correctly. In case you can't find the manufacturer's name in the System Information window, check your motherboard manufacturer's website. Commonly,American mega trends'are used to assemble a computer. In addition, you can also checkWindows updatesfor any new BIOS edition available for your computer. Please read the following steps and be very careful during the process.

  • invoke theRundialog usingWin+Rtogether.
  • Writemsinfo32in the blank search box and press Enter.
  • To locateBIOS version/datebassArticlelist and also write it down.
  • Now, open your default browser and visit the manufacturer's website for BIOS.
  • Download and install the latest version of the app.
  • This can take time, so if you are using a laptop, you should make sure to keep the charger plugged in until the installation is completely complete.
  • Once the procedure is finished successfully, reboot the device for these changes to take effect.

3] Remove problematic updates

If removing the existing update resolves CLOCK_WATCHDOG_TIMEOUT, you should prevent the update from being reinstalled. Sometimes updating patches with Windows Settings app gets into a sticky situation which eventually causes the problem on Windows 10. To fix this problem, delete those files and then check if this error still occurs or not. To do this, follow the steps below:

  • OpenWindows settingsusing the hotkey Win+I.
  • Click on theUpdate and securityoption.
  • Choosewindows updatelying on the left panel.
  • On the right side of the page, click theView update historyoption.
  • Click on theuninstall updatesLink.
  • Locate the names of the recent updates, as they are the most likely cause of this problem.
  • Right click on it and select theuninstalloption.
  • Now, follow the instructions on the screen to complete the procedure.

4] Use the DISM tool to fix error 0x00000101

If your system contains corrupted Windows image files then there is a high probability that CLOCK_WATCHDOG_TIMEOUT BSOD will occur on the screen. In this situation, you need to fix this 0x00000101 error quickly by using the DISM tool in the elevated Command Prompt. Here are the full guidelines:

  • OpenRundialog usingWin+Rhot key together.
  • Writecmdin the text box provided and pressCtrl+ Shift+ Enterat the same time.
  • If UAC appears on the screen, press the buttonYesbutton.
  • On the next screen, enter the following command:
                      
                        DISM.exe /Online /Cleanup-image /Restorehealth
                      
                    
  • press Enter and wait for a while to run the process.

5]Run the command sfc /scannow

Operating system with missing DLL files and damaged resources is a possible reason that causes BSOD error 0x00000101 on the device. To recover the important components, you can rectify these components using a simple tool called System File Checker. This alternative tool will only be effective in an elevated command prompt. Follow the guidelines below to complete the task:

  • presswin+Shotkey combination to invoke search on the taskbar.
  • Writecmdin the text area provided.
  • Right click on the 'Command Prompt' and selectExecute as an administrator.
  • When prompted by UAC, clickYesto give your consent.
  • Enter the given command and press the Enter key –
                      
                        Sfc /scannow
                      
                    
  • Wait a moment and this will find and resolve all corrupted system resources.
  • Reboot your device and check the error code.

Error 0x00000101

6] Uninstall similar apps from the system

Sometimes similar applications on the system collide with each other and eventually become the cause of system resource deletion. This behavior creates a conflict in the proper functioning and ends in the BSOD error 0x00000101. Here, we need to uninstall these programs with their settings using the following instructions:

  • Open thesettingsapplication as explained above.
  • Click on theApplicationscategory.
  • SelectApps and featureslocated on the left side.
  • In the right pane, find out the programs that are colliding with each other after loading the list.
  • Expand those by clicking and finally selectuninstallto start the removal.
  • When prompted by UAC, pressYesto give consent.
  • Follow the instructions until they are uninstalled.

7]Perform System Restore

While personalizing your device, you can use various programs from Microsoft or from external sources. However, several times it happens that these applications contain similar purposes and try to change the same system components. This action creates a conflict in the proper functioning and ends in the BSOD error 0x00000101. So, just try uninstalling these programs along with their setup and see if that fixes the problem. Also, before doing this resolution, make sure to create a restore point. To do this, follow the given steps:

  • Click the Start button and select theRunoption.
  • Writerstruiin the empty field and press theokaybutton.
  • In the system restore wizard, selectNext.

Error 0x00000101

  • On the next page, clickShow more restore points.
  • Press the last present in the list and also selectthe nextbutton.
  • finally hitTo finalizeto start the process of undoing the changes and returning to the previous stage.

8] Uninstall the third-party application

The Microsoft team developedwindows securityto deal with malicious software using a bunch of free antivirus applications. This antimalware is quite common and they are mostly free. However, being a third-party application, they often become the cause of the 0x00000101 BSOD error. So, to remove these apps, follow the steps:

  • Open theRundialog usingWin+Rkeys.
  • Writeappwiz.cplin the text box and press the buttonokaybutton.
  • When the Programs and Features window appears, look for the third-party malware tool in the list.
  • Select the app from there and click on theuninstalloption.
  • Move with the instructions on the screen until it is successfully removed.

9]Use Check Disk Tool to Fix Error 0x00000101

The hard drive volume may experience bad sectors in long time usage. You are at high risk of getting BSOD error 0x00000101 in Windows 10 if you have the same poor areas on your HDD. Disk Checking Utility is the best tool to correct this problem. See how to do it –

  • Right-click on the taskbar and selectTask Managerfrom the list that appears.
  • Select theProceedingsoption, available in the upper left corner.
  • Chooserun new taskto proceed.
  • Once the dialog box appears, typecmdin the blank text area.
  • Check the box “Run this task with administrative privileges”
  • press the Enter key to open the elevated Command Prompt window directly.
  • Type the following command and press Enter

chkdsk C: /f /r /x

  • Disk Checking Utility will start looking for bad areas on the hard drive and will eventually repair them.
  • This process will take a little longer, so please be patient.

10] Update corrupt drivers

Commonly, incompatible or outdated device drivers are the main culprits that cause the 0x00000101 BSOD error on your device. It would be essential to update your device at a regular time interval using theDevice administrator. To explore such drivers, simply open Device Manager and look for the yellow exclamation point in front of the driver. This indicates that the device is colliding with other hardware or might not be installed correctly. If there is one, simply update that particular driver by following the steps below:

  • Right click on theBeginningbutton and select theRunoption.
  • Write "devmgmt.msc” and press Enter.
  • Look for any yellow exclamation marks before the available device drivers.
  • If you find it, expand and then right-click on the faulty driver.
  • In the context menu, choose theupdate driveroption.
  • A new window will appear with two options to choose from.
  • Select “Automatically search for updated driver software
  • Follow the same instructions for other corrupt drivers as well.

While updating all the outdated device drivers, try to update the Windows operating system again. Fortunately, this time you won't experience the 0x00000101 BSOD error while doing it.

Find and fix driver problems automatically through PC repair tool – 'DriverFix'.

11]Run the blue screen troubleshooter

Microsoft developed Windows blue screenFiremanwhich can search for and resolve possible BSOD errors. This is a built-in troubleshooting app that locates the root cause of blue screen errors and helps you fix them. By default, this section is disabled, so please enable this tool and follow these guidelines:

  • Click on theBeginningand then select settingsGearIcon.
  • In the Settings app that appears, chooseUpdate and securityoption.
  • Click onSolve problemsfrom the left column.
  • Switch to the right side and locate theBlue screenoption.
  • Select it and pressRun the troubleshooterbutton.

Related Posts